HOFFMAN 404210 Float Thermostatic Steam Trap FT015H-4 406

( Brand: Hoffman ), ( Model: FT015H-4 ), ( Type: Steam Trap ), ( Unit Type: Unit ), ( Manufacturer Part Number: 404210 ), ( Country Of Origin: United States )

Review HOFFMAN Float And Thermostatic Steam Trap Psi 406

The Hoffman 404210 FT015H-4 is a high-performance float thermostatic steam trap designed for industrial applications. This trap is specifically engineered to automatically release condensate and non-condensable gases from steam lines, ensuring efficient and consistent steam flow.

The FT015H-4 features a robust cast iron body, which is resilient against the corrosive effects of steam and condensate. The body is also equipped with a removable cover, allowing easy access for maintenance and inspection. The trap's float mechanism is made of stainless steel, providing superior durability and resistance to corrosion.

The thermostatic element of this steam trap is designed to operate within a wide temperature range, ensuring reliable condensate discharge even in fluctuating steam temperatures. The element is also self-adjusting, enabling the trap to maintain optimal performance over time.

The FT015H-4 is available in various sizes to accommodate different steam flow requirements. This particular model is suitable for steam lines with a diameter of 15 mm (0.59 inches) and a maximum steam pressure of 4 bar (58 psi). The trap has a maximum discharge temperature of 100 C (212 F) and a maximum condensate flow rate of 1.2 liters per minute (0.32 gallons per minute).

The Hoffman 404210 FT015H-4 is easy to install and requires minimal maintenance. The trap comes with a built-in test port, allowing for simple field testing to ensure proper operation. The FT015H-4 is a reliable and cost-effective solution for maintaining efficient steam systems in industrial applications.

The Hoffman 404210 FT015H-4 Float Steam Trap is a thermostatic steam trap with a 15 psi pressure rating and a 406 degree F temperature rating. Here are some pros and cons that might help you make a decision about purchasing this specific steam trap:

1. Float and Thermostatic Design: The float and thermostatic design of this steam trap ensures reliable steam trapping. The float valve prevents steam from escaping when the condensate level drops, while the thermostatic valve opens when the temperature reaches the set point, allowing steam to flow in and heat the condensate.

2. Easy Installation: This steam trap is relatively easy to install, as it comes with all necessary mounting hardware. It can be installed vertically or horizontally, making it a versatile option for various applications.

3. Durable Construction: The Hoffman 404210 FT015H-4 Steam Trap features a brass body and stainless steel internals, making it a durable option for steam applications.

4. Temperature and Pressure Rating: The 15 psi pressure rating and 406 degree F temperature rating make this steam trap suitable for a wide range of steam applications.

1. Cost: The Hoffman 404210 FT015H-4 Steam Trap may be more expensive compared to other steam traps in the market with similar specifications.

2. Maintenance Requirements: Like all steam traps, this model requires regular maintenance to ensure optimal performance. This includes checking the float and thermostatic valves for proper function and cleaning the strainer basket to prevent clogging.

3. Limited Size Options: This specific model comes in a fixed size, which may not be suitable for all applications. Other size options or custom designs may be required for specific applications.

The Hoffman 404210 FT015H-4 Float Steam Trap is a reliable and durable option for steam applications with a temperature and pressure rating of 15 psi and 406 degree F. Its easy installation and float and thermostatic design make it a versatile choice for various applications. However, its cost and maintenance requirements may be a consideration for some. Ultimately, the decision to purchase this steam trap depends on the specific requirements of your application and your budget.

If you're in the market for a reliable and durable steam trap with a float and thermostatic design, the Hoffman 404210 FT015H-4 Float Steam Trap is a solid choice. However, it's important to weigh the pros and cons carefully and consider other factors such as cost, maintenance requirements, and size options before making a final decision. Additionally, be sure to consult with a steam system expert or professional to ensure that this steam trap is the best fit for your specific application.

Details:

Steam Trap, F NPT. Type Float And Thermostatic. HOFFMAN 404210 - FT015H-4 Float and Thermostatic F STEAM TRAP, 15 psi, 406F, 5-1/2 In. This trap has a capacity for1,600 pounds per hour.

Pressure Air Vent Self-Adjusting.Series F traps are continuous drainage and are designed for low, medium, high pressure steam mains come standard with stainless steel internal parts. The traps are designed for service on heat exchange equipment where there is a need to vent air and non-containable gases quickly.They recommended modulating pressures widely varying loads represent good choice their ability at very low pressures, handle start up loads, operate against back pressure. This configuration also allows for more flexibility when piping in.

Type: Series. The Hoffman Specialty float and thermostatic F steam trap, model FT015H, features a 1 trap connection in same side, H-pattern configuration. Proudly Made in USA. Body Material Cast Iron.

This pattern allows steamed enter from either side of the trap, and condensate to discharge from either opposite or same trap. The FT015H is cast iron and has a 15 psi maximum operating pressure.

part #: 404210 prices

• $196.15-$259.00

specifications aerationaura:

• brand: Hoffman
• model#: FT015H-4
• type: Steam Trap
• unit type: Unit
• manufacturer part number: 404210
• country of origin: United States

offer aerationaura:

• started: October 29, 2025
• availability: In Stock
• best offers: True
• options: Ship-to-home
• sold: 0
• quantity: 1

seller aerationaura:

• # reviews: 3567
• city: Mentor, Ohio
• rating: 100.0%

shipping aerationaura:

• transit: 3-8 Days
• type: Calculated
• class: Standard, Expedited
• carrier: USPS, UPS
• service: USPS First Class, USPS Priority Mail, UPS Ground
• cost: $0.00

returns aerationaura:

• policy: Returns Accepted
• paid by: Buyer
• method: Money back
• time: 30 Days

general aerationaura:

• Home Improvement > Heating, Cooling Air > Other Heating, Cooling Air
• condition: New

payments aerationaura:

• credit card: Mastercard
• cash
• wallet: Google-pay
• other

Hoffman 404210 Is Similar To:

• Hoffman 401422 Steam Air Vent 1a 1 8 Inch Adjustable Angle Radiator Valve (32.7% similar) New in package item, box has wear including scuffs and tears...(December 16th, 2024)
• Raven Ravha18 ravha18 1 8 Inch Steam Angled Radiator Vent Hoffman Style (15.1% similar) Condition is new. Raven #raves 18 1/8 in. Shipped with USPS ground advantage. Steam angled radiator vent Hoffman style...(March 2nd, 2025)
• Bell Gossett 751875018408 And Hoffman Specialty 43 1 4 Inch Male Pipe Straight Steam Radiator Air (29.9% similar) 1/4 not straight shank. Air valve non-vacuum. For small steam systems. Maximum operating pressure 6 pig 0.4 bar drop away - maximum against which the vent can open. Maximum pressure 10 pig 0.7 bar. Telescopic siphon tube with angle cut assures drainage. Bell cosset Hoffman...(March 19th, 2025)
• Bell Gossett 401440 And 401440 Hoffman 40 Steam Vent Radiator 1 8 Inch Case Of 144 New (27.7% similar) Cases are direct from factory. Hoffman specialties was acquired by tit in 1970 . Save money buying bulk. There is still confusion about the difference between b g, Hoffman, and xylem. In recent years there has been relabeling of boxes due to branding refreshes and marketing strategies...(July 15th, 2025)
• Hoffman Specialty 401542 17c-2 401545 Thermostatic Swivel Short Nipple Steam Trap New In Box (53% similar) The model number 17C-2 401545 indicates the specific design and capabilities of this product, ensuring it meets needs industrial applications steam trapping systems. This steam trap is specifically designed with a thermostatic angle short nipple feature, making it an efficient and reliable...(November 16th, 2025)
• Bell Gossett 401434 And Hoffman Steam Air Valve 1 2 Inch Fnpt 3 Psi Mnpt Connection (28.9% similar) Part #: bell cosset 401434 for sale...(December 3rd, 2025)
• Hoffman 401432 Vacuum Valve 1 2 Inch X 3 4 Steel 15 Psi Non-adjustable Npt (37.8% similar) The Hoffman 401432 vacuum valve is a steel valve designed for venting applications. With a 1/2 x 3/4 size and maximum pressure of 15 psi, this non-adjustable valve is reliable efficient for controlling airflow in heating cooling systems...(May 5th, 2026)